價格：免費
更新日期：2019-06-28
檔案大小：9.8M
目前版本：1.0.4.8
版本需求：Android 4.4 以上版本
官方網站：mailto:yuanmeiyuanmei@gmail.com
A smart, efficient and convenient method to manage garden watering and large scale irrigation.
This water timer can be programmed wirelessly, allow you to use your smart phone or tablet to control all the programming and interface functions on your water timers or irrigation controllers. The app has easy-to-follow cues that are displayed on your smartphone to guide you through the process. The timer can be set to water on any or all days of the week, from 10 times or more per day, with a duration ranging from one minute to 12 hours.
The water-delay setting lets you postpone your irrigation cycle without losing your preset program. You can also manually control the settings right at the faucet, without using the app. You can even manage multiple timers from the same app. These tap timers will automatically water sequentially once they are programmed via your smartphone or tablet. No need to open the user’s guide to figure which buttons to push. The App is highly intuitive and programming is simple.
Features:
•Smart Bluetooth® garden timer where you change the method of watering your garden from a range up to 30 ft (10 m). Enables you to control your garden's watering schedule from your smart phone, tablet remotely.
•Easy to install application and simple to operate.
•Daily, Weekly and cyclical programming. A four zone timer allowing you to water four different areas from the same faucet. Each zone can be programmed with different start time (Single and two zone timers follow this same guide).
•Manage one or many controllers from a single app with the ability to name each controller, capture an image or uploaded from your gallery. You can replace the valve's photo and name to easily distinguish between them where you want to water.
•The timer is constructed using weather and UV-resistant ABS material housing and requires 4 x AA (1.5v) (Alkaline batteries, not included)
•Works with water pressure from 10 to 120 psi (0.7 bar to 8 bar / 69 kPa to 827 kPa)
•Manual settings from the App is simple task (Manual watering in 1 minute increments up to 360 minutes)
• No Need to open the user's guide to figure which buttons to push. The App is highly intuitive and programming is simple to use.
Timer Spec:
Range: 30 ft. (10 meters) without interference
Pressure Operating: 10 – 120 PSI
Temperature Operating: 32-110˚ F (0-45˚ C)
For outdoor use with cold water only!
Not for use with household appliances
Do not mix Alkaline, carbon-zinc, or rechargeable batteries Used or dead batteries must be removed from the timer and disposed properly
